Tech Support: Selecting a ControlLogix®-Modbus® TCP/IP Module

Tech Support: Selecting a ControlLogix®-Modbus® TCP/IP Module

Need to connect your Rockwell Automation® ControlLogix® controller to a device speaking Modbus® TCP/IP? ProSoft offers several modules that do just that, but selecting the right one depends on the needs of your application. This video explores those considerations, giving insight into which module is best for your application. You can also find out more about all of our Modbus solutions at http://psft.com/BWO

You may also like

Demo: ProSoft Wireless Designer and IH Browser
15:53
Planning an industrial wireless network? You'll want to watch this ...
Webinar: The Future of Remote Networking
33:41
We’re setting up remote data transfers among three continents – you’ll ...
Set Up: PROFIBUS DPV1 Master/Slave Module for ControlLogix®
28:40
In this training video, we focus on setting up the new ILX56-PBM ...
Set Up: For AB Remote I/O to EtherNet/IP Flex I/O scanner
17:17
This video walks you through the process to setup ProSoft's ...
Groundbreaking Security and Safety feature for Remote Access
8:14
In this video, we’ll go over the process to enable and use a new ...
Set Up:  SMS Messaging with a Modicon M340 PLC
11:09
In this follow-up training video about ProSoft Technology’s ICX35-HWC ...
Set Up: For AB Remote I/O™ to EtherNet/IP™ drive migration gateway
18:21
This video teaches you how to setup ProSoft's AN-X2-AB-DHRIO gateway ...
Set Up: Upload and Download PLC programs from an EtherNet/IP™ PC to a DF1 PLC
7:29
Since Rockwell Automation® discontinued the 1761-NET-ENI, you may be ...

Page 1 of 10