Easily Pass Data Between RA ControlLogix and Siemens S7 CPUs via Siemens Industrial Ethernet
/i /af

Easily Pass Data Between RA ControlLogix and Siemens S7 CPUs via Siemens Industrial Ethernet

This is a quick example of passing data (DINTs in this case) between Rockwell Automation ControlLogix CPUs and Siemens S7 CPUs via Siemens Industrial Ethernet.

All this is done without any modifications to the RSLogix 5000, or Step 7 project files. Communications between the two systems is completely handled and offloaded to the ProSoft Technology ILX56-MM Message Manager.

For more information on the ILX56-MM Message Manager, please visit the product page listed below:
http://www.prosoft-technology.com/content/view/full/13843

ProSoft - Tutorials
LinkedinPin ItWhatsApp

You may also like

Demo: ProSoft Wireless Designer and IH Browser
15:53
Demo: ProSoft Wireless Designer and IH Browser
Planning an industrial wireless network? You'll want to watch this ...
ProSoft - Tutorials
Webinar: The Future of Remote Networking
33:41
Webinar: The Future of Remote Networking
We’re setting up remote data transfers among three continents – you’ll ...
ProSoft - Tutorials
Set Up: PROFIBUS DPV1 Master/Slave Module for ControlLogix®
28:40
Set Up: PROFIBUS DPV1 Master/Slave Module for ControlLogix®
In this training video, we focus on setting up the new ILX56-PBM ...
ProSoft - Tutorials
Set Up: For AB Remote I/O to EtherNet/IP Flex I/O scanner
17:17
Set Up: For AB Remote I/O to EtherNet/IP Flex I/O scanner
This video walks you through the process to setup ProSoft's ...
ProSoft - Tutorials
Groundbreaking Security and Safety feature for Remote Access
8:14
Groundbreaking Security and Safety feature for Remote Access
In this video, we’ll go over the process to enable and use a new ...
ProSoft - Tutorials
Set Up: SMS Messaging with a Modicon M340 PLC
11:09
Set Up: SMS Messaging with a Modicon M340 PLC
In this follow-up training video about ProSoft Technology’s ICX35-HWC ...
ProSoft - Tutorials
Set Up: For AB Remote I/O™ to EtherNet/IP™ drive migration gateway
18:21
Set Up: For AB Remote I/O™ to EtherNet/IP™ drive migration gateway
This video teaches you how to setup ProSoft's AN-X2-AB-DHRIO gateway ...
ProSoft - Tutorials
Set Up: Enable a SCADA on OPC UA to get Data from an EtherNet/IP or Modbus TCP Device
22:08
Set Up: Enable a SCADA on OPC UA to get Data from an EtherNet/IP or Modbus TCP Device
ProSoft Technology’s PLX32-EIP-MBTCP-UA gateway brings together ...
ProSoft - Tutorials
Set Up: Upload and Download PLC programs from an EtherNet/IP™ PC to a DF1 PLC
7:29
Set Up: Upload and Download PLC programs from an EtherNet/IP™ PC to a DF1 PLC
Since Rockwell Automation® discontinued the 1761-NET-ENI, you may be ...
ProSoft - Tutorials
Set Up: Sending data between a DF1 slave device and an EtherNet/IP™ Logix controller
7:58
Set Up: Sending data between a DF1 slave device and an EtherNet/IP™ Logix controller
Trying to modernize your DF1-based operation to one utilizing ...
ProSoft - Tutorials
123…10

Page 1 of 10